Concrete saw cutting in Dubai and across the UAE
Concrete saw cutting makes the openings that are too large for a core: doors, windows, lift shafts, trenches and expansion joints. Alpha Core Drill cuts with diamond wall saws and floor saws, scans the cut line with GPR first, and leaves straight edges with the surrounding concrete intact.

Wall & floor
SAWS
Straight
EDGES
Water-cooled diamond
BLADES
GPR scan of the cut line
BEFORE EVERY CUT
What saw cutting is used for
OPENINGS TOO BIG FOR A CORE
Door, window and lift shaft openings
600+mm
Trenches for drainage and services
Expansion and control joints
Slab openings for new stairs and voids
Wall openings for ducts and services
Saw cutting or core cutting?
Cores suit round holes up to 600 mm. Anything larger, square or long, such as a door, a shaft or a trench, is saw cut. Wall saws run on a track fixed to the wall. Floor saws cut slabs and ground-level concrete.
Door openings
Window openings
Lift shafts
Stair openings
Trenches
Expansion joints
Slab sections
Wall openings
How concrete saw cutting works
01
Scan
We scan the cut line with GPR and mark rebar, PT cables and conduits.
02
Mark out
The opening is marked out to the drawings and checked against the scan marks.
03
Cut
Water-cooled diamond blades cut the outline, which keeps dust down.
04
Remove
Cut sections are removed and the area is cleared.

Our saw cutting equipment
Diamond wall saws on tracks for vertical openings, and floor saws for slabs and trenches. Our equipment offers a maximum cutting depth of 530 mm using a 1200 mm diameter diamond blade.
Planning a saw cut
Cutting depth, access for the saw track and the weight of the cut sections decide how an opening is cut and removed. Large openings in loaded walls or slabs may need temporary propping designed by the project structural engineer.
WORKS WELL
Door and window openings
Trenches and joints
Slab openings
NEEDS PLANNING
Openings in PT slabs
Heavy sections to lift out
Tight access for the track
Concrete saw cutting cost in Dubai
A
Length and depth of cut
B
Number of openings
C
Concrete thickness and steel
D
Access, height and working hours
Send the opening sizes and the concrete thickness, and we will confirm a price and a date.
Scanning, coring and cutting from one contractor
Every cut line is scanned before the saw goes in. The cutting crew works from our own technician's marks.
Concrete saw cutting FAQs
When do I need saw cutting instead of core cutting?
When the opening is larger than 600 mm, square or long, such as a door, shaft or trench.
Do you scan before saw cutting?
Yes. Every cut line in reinforced or post-tensioned concrete is scanned with GPR first.
Is saw cutting dusty?
Diamond blades are water-cooled, which keeps dust down. Cutting also causes less vibration than breaking concrete.
Do you offer saw cutting outside Dubai?
Yes, across Abu Dhabi, Sharjah, Ajman and Ras Al Khaimah.
Who removes the cut sections?
Removal and disposal of cut sections are optional services and will be charged additionally.
Request a quote
Send the opening sizes and the concrete thickness. We will confirm a price and a date.
